|
Post by Jesse Lazenby on Dec 8, 2015 14:56:11 GMT -6
1. What type/rating of fiber is currently installed, between campuses and between closets?
2. Do you want redundant power at each switch?
3. How is the current network segmented (VLANS) and what L3 routing protocols are you using or which to use?
4. Are there any closets that need to be listed on a separate quote?
5. Have you counted for growth in the supplied port/device count? If not what percentage over needs to be considered?
|
|
|
Post by Jeremy Peeler on Dec 9, 2015 14:14:16 GMT -6
1. What type/rating of fiber is currently installed, between campuses and between closets? 2. Do you want redundant power at each switch? 3. How is the current network segmented (VLANS) and what L3 routing protocols are you using or which to use? 4. Are there any closets that need to be listed on a separate quote? 5. Have you counted for growth in the supplied port/device count? If not what percentage over needs to be considered? 1. 24 Strand OM-4 50 Micron Multimode fiber between all MDF, MDF-1A, IDF's/Closets terminated as LC. We have Single Mode between each location for our WAN: JES - JHS JJHS - JHS JPS - JHS Admin Building - JHS Trans/Maint Dept - JHS SPED Offices - JHS Field House - JHS (2 Strand .625 Multi Mode 1GB (ST Terminated) (ST-LC Patched from Panel to Switches) 2. Yes for Full Port POE+ Coverage of switch ports. 3. We are using STATIC Routes for all routing. VLAN Structure is located in our "Documents" section of our E-Rate Page: Documents Section 4. Admin Building, Field House, SPED Offices, Trans/Maint Dept. 5. Yes we have.
|
|